Notes about programming of ford blue remote

1：Please test if the key has right frequency and chip via device before programming.

2：After OBD device communicated with car, please choose the right car model on device and do “adding new key”, then please follow the device to program the new key.

Note: Please dont program key chip (ignition function/starting car function) in advance. After remote function is programmed, ignition function is available automatically.  

If key chip programming happens before remote programming, this key will fail.

3：During remote programming, sometimes it will fail on some cars. The reason may be the ignition coil is too old and weak so the new key could not catch the signal from ignition coil. So please take off the key head/blade, and put the remote closed to the ignition coil as tightly as you can for programming.